VHS Display Stand Makeover

Introduction: VHS Display Stand Makeover

We had an old VHS display stand that we were about to put out by the curb. I
had just finished throwing some discs around in the yard after finding some in a bag. As I was walking the display stand to the curb I looked on the ground and saw one of my disc. I then had an idea, I'll use the VHS display stand to now show off my discs and to add some color to my rec room.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Putting the Discs in the Display Stand.

This is a pretty straight forward step just make sure they fit snug or they will fall out. I do find that putting the drivers and fairway discs at the top secures the discs better since they are thinner than the putters and short game discs. I have lost a few discs lately so what I have done is spaced these out every two spaces, but I usually space them out every other one.

Step 2: Finished Product

Here is what the finish product looks like. I don't play as much as I used to so the discs are on display more than they are being used. I have done this for about 4-5 years now, and I have not noticed any warping of the discs that would effect their performance.

Before and After Contest

Participated in the
Before and After Contest

Be the First to Share

    Recommendations

    • Toys and Games Challenge

      Toys and Games Challenge
    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge

    2 Discussions

    0
    bbrewer12
    bbrewer12

    Reply 4 years ago

    Thanks!