(Voxel) DIY 3D Link (Legend of Zelda)




About: I create 2D and 3D Voxelized Perlerbead Pixel art based on characters of video games, comic books and pretty much anything in the geek culture.

This instructable is for a Voxelized Rainbow Dash you can make your own from perler beads, hama beads, nabbi beads, or any type of melty beads (Preferably I use Perler brand). You can watch the video and follow along if you like.

(Please credit me should you use or manipulate this pattern. Please be respectful and don't mass produce or sell the finished product). Thank you!!! Enjoy!

Step 1: Gather Materials & Download Your Pattern

Materials needed:

  • Superglue (Loctite)
  • Ironing paper
  • Pegboard reg & Mini
  • Reg Beads & Mini (Colors list in file download or photo above)
  • Books (used for weight)
  • Exacto Knife (for mistakes)

Download your (Link Pattern)

Step 2: Start Beading and Iron Out Your Layers

I do the highest number before the max my iron uses. For my iron it is number 3 (the last number before the meter turns red) I like to iron each one separately on the middle of each board

your choice (I think it melts more evenly)

For some of the layers that contain small pieces for details of the wings, ears, pony tail, and legs I seperate them and iron them like I show in the 3 photos above

After you Iron out your layers make sure you add weight so the layers won't bend, usually this doesn't happen but the more beads the more chances your layers will bend.

Step 3: How to Glue

Link's photo patterns are already placed the exact way the character should be glued

once you preview your photo just press the right arrow and compare photos

By memory or with dry erase marker, mark the corners of where you will be placing the pattern over. the photo above shows an example of how I watch what I glue.

Do this after gluing every layer

Step 4: Glue Your Layers

All you need is one drop of glue on each bead you stick


  1. Remember to take your time, superglue is very hard to take apart
  2. Align the layers with your fingers
  3. Apply lots of pressure to each layer glued (be careful where you add pressure from)

Step 5: All Done! Hope You Like Your Link

Follow VoxelPerlers for more perler bead tutorials!

Please like my other sites!

Please remember to credit me on your creation! share it with me on any of my sites I would love to see what you have made =)

I am now taking donations to continue my youtube and Instructables tutorials. Every penny goes to purchasing more beads and time for making these tutorials for you!Have any questions please email me or comment below.
Thank you!!!



    • Paper Contest

      Paper Contest
    • Organization Contest

      Organization Contest
    • Warm and Fuzzy Contest

      Warm and Fuzzy Contest

    2 Discussions


    2 years ago

    thats epic I love Zelda