simple walking robot with 1 gear robot
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Materials Required
1 PVC pipe
2 a hot glue gun
3 a gear motor
4 a lithium battery (available in Amazon)
5 a stand with a tail ball
Step 2: Circuit
1 Cut the PVC pipe into half and 4mm thick covered by hot glue gun.
2 connect the two pipes to both the side of the geared motors
3 solder one wire of motor to a switch and connect other to lithium battery.
4 paste the switch,motor and stand together with hot glue gun.
Step 3: Your Robot Is Ready
that's all your robot is ready