Wall Mirror - Sunglasses

Introduction: Wall Mirror - Sunglasses

A nice decorative piece!

Step 1: If You Have a Cnc Machine This Would Be an Easy Project But for Those of You Who Don't ,like Me, You Can Print Out the Drawing to the Dimensions You Like So You Can Cut It Out With a Band Shaw or a Jigsaw.

Step 2: The Frame

i used a 2.5 cm mdf to make the skeleton and after you cut out the template sand it and round the edges you have something that looks like the photo.

Step 3: Finishing

After you paint it and install your mirrors it's ready to hang it on your wall! hope you like it! as you can see its quite large¬°

Be the First to Share

    Recommendations

    • Pocket-Sized Speed Challenge

      Pocket-Sized Speed Challenge
    • Metalworking Contest

      Metalworking Contest
    • Maps Challenge

      Maps Challenge

    3 Discussions

    0
    livichris
    livichris

    4 years ago

    Steve ramsay on YouTube made these a few weeks ago

    0
    tocsik
    tocsik

    Reply 4 years ago

    Steve Mentions that he got the idea from Chris.

    http://woodworking.formeremortals.net/2015/08/mirror-mirror-make-a-sunglasses-wall-mirror/