This device lets you block websites for a certain amount of time. In this Instructable we show you how we made this. We made this for the TU delft TfCD project.
Step 1: Arduino Micro Code
Download the provided Arduino code
Make sure to read all the comments in the code
Change the code with the website(s) you want to disable
Change the variables “password” to your own password
Step 2: Breadboard
Build the breadboard prototype as show in the image.
Upload the code to the Arduino to test
Step 3: STL File Download
Download the stl files provided
Step 4: Print
Print the models using <.25mm layer height and 0.8mm wall thickness. Do not use a thicker nozzle than .4mm.
Step 5: Assembly
Assemble all the parts and solder the different wires.