Introduction: Welding With Superglue (cyanoacrylate), Baking Soda (sodium Bicarbonate) and Instamorph .
Step 1: It's Broke!
Both metal legs of my ironing table broke.
Step 2: Stuff Needed
I glue it back with superglue and baking soda.
Step 3: Layers of Superglue and Baking Soda
You must put a layer of superglue and immediately pour baking soda over it.
Wait a few seconds and repeat it.
Make a few layer this way in both sides if possible.
Step 4: Instamorph Ring
To keep the place stable i added a ring of thermoplastic (Instamorph)
Step 5: Voilá
Saved a few bucks fixing instead of buying.
Step 6: FAIL!
Unfortunately the glue+soda wasn´t strong enough for this job.
I used the table a couple of times but today it failed.