Introduction: Wizard Carving Out of Wood I Christmas Ideas
Christmas is in the air all around. My hubby got me a gift already - a Wizard Carving Kit from BeaverCraft. I found the box in the closet. I think he should hide gifts better :D
When I saw the box I was quite impressed, it looks so great. There is a wizard and lamp and books. Everything as I love. If they'd put a cup of coffee there, I think unpacked it quicker :D
So I didn't manage to leave it as it is. I opened the box in a few days.
Of course, my hubby got to know about that. Now he's looking for a new gift :D (happy me to get a bunch of gifts) While we did carve a wizard yesterday.
I'm happy to share it with you.
As I mentioned above you can buy right away a kit from BeaverCraft just for $25 with the magical packaging.
Or you can get yourself necessary stuff:
- whittling knife
- safety tape
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Wizard Pattern
Our journey to the fairytale starts now. We’re going to carve a wizard out of a small piece of wood. Make sure to choose the name for your wizard in the end! First, let’s draw the pattern for our wizard.
Step 2: Hat Job
Let’s remove the upper part and work on a hat of our wise wizard.
Step 3: Drawing Part
Draw the lines on your wooden block as you see in the picture.
Step 4: Hat Job II
Again let’s do some work on a Wizard’s hat.
Step 5: Drawing Part II
Draw the lines of the hat in the front and at the side.
Step 6: Nose Job
Now make a smooth transition from the hat. Then make the deeper cuts along the contour. Do the job on the nose and deepen the face area.
Step 7: Beard Job
We can’t forget about the beard, right? Make sure to work on it going along the lines.
Step 8: Back Part Job
Afterward, draw the back part. Then make deeper cuts with a knife.
Step 9: Finishing Touches
We need to draw the beard lines and deepen the beard. Our wizard looks glam :)
Step 10: Beard Lines
Make sure to draw the beard lines. And then cut along the contour.
Step 11: Grats. Wizard Is Done
Hurray! We made a Wizard out Wood!
Step 12: Christmas Is on the Way
We hope you enjoyed carving a wizard.
I loved carving a wizard a lot.
After the purchase, guys from BeaverCraft sent my hubby a video-tutorial by email. This was much useful and easy to follow.
In case you get any questions/issues, feel free to message me here anytime!