Maker : Bunty Gir , Harwinder Singh , Ashveer Sharma.
Place : Khera Jattan Nook .
2. Plastic Ball
3. PVC Water Pipe
Step 1: Cut the Wood
Cut the 3 long wooden pieces using jigsaw machine as shown in the images.
Step 2: Take Yellow Plastic Ball and Fix It
Take yellow plastic ball and fix it with three wooden pieces as shown in the image.
Step 3: Take Small PVC Water Pipe
Take two small cutted PVC water pipes pieces and cut it from the center as shown in the image.
Step 4: Cut Three Small Wood Pieces
Cut three small wood pieces an fix it at the bottom of the tripod as shown in the image.
Step 5: Take PVC Water Pipe
Take PVC water pipe as shown in the image.
Step 6: Take Small Materials
Take small materials to fix the tripod as shown in the image.
Step 7: Finally Tripod Ready
Finally Tripod is ready for use as shown in the image.