Hey geeks, today I finished a new quick project ie: Yoga Girl - Led Lamp. And here is the build log...
Step 1: Design & Engraving
Step 2: Base / Electronics Enclosure
Next I cut some pieces of 8mm MDF to create enclosure. On top I cut a 5mm slot to fit base of acrylic. Then I glued all MDF sections together including acrylic.
Step 3: Electronics
I took piece of LED strip exact same size of the acrylic piece. Added 12v 1Amp transformer for power. Affixed everything underneath the acrylic.
Step 4: Result / Conclusion
Result was pretty cool in dark as well as in day light in room.