Ze Lego Cross Bow

Introduction: Ze Lego Cross Bow

About: I am a lego mindstorms fan and builder. I primarily make lego battlebots, but i also make ball machines. Hope you like all my stuff!

Hello Everyone!

This is my first instructables. It is on a Lego Cross Bow.
This is an original idea.
This Cross Bow is a nice little weapon. It has a good range of over 20 feet if two dual 64 rubberbands are used.
Sorry if the instructions in the end are vague but i got a robot fight soon.

Step 1: The Bow

Sorry the Instructions are so vague, but it is hard to disassemble.

Step 2: Bottom Barrel + Trigger

Same as last sorry for vagueness.

two parts go together

Step 3: Handle

Follow instructions
Then add by putting in gaps and push in pins 

Step 4: Upper Barrel

Just follow the pictures

Step 5: Stock


Step 6: Wheel Stand


Step 7: Ammo

Make as many as you want. This is the best ammo.

Step 8: Final Piecing

Straight forward

Step 9: Rubberband Attachment

Follow pics
Attach one strong and two weaks on trigger and the square.

Step 10: Firing

pull back and loop around
load through the front
pull trigger

Step 11: Congratulations!

You made LegoBlackSmith's Cross bow. use it to shoot anything you desire.

Be the First to Share


    • Puzzles Speed Challenge

      Puzzles Speed Challenge
    • Secret Compartment Challenge

      Secret Compartment Challenge
    • Lighting Challenge

      Lighting Challenge

    2 Discussions