Zvs Induction Heater

About: I like doing random electronics high voltage projects

my first induction heater instrutable

Step 1: Schematic

this is a schematic similar to mine. use 27v at l2 . at r1 and r2 use 10v as your gate drive. hook the negative of 15v to the ground and the 27v negative goes to ground
the MOSFETs should be the irf3205 here is a link to buy them on ebay: http://www.ebay.com/itm/like/360750944641?lpid=82&chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%253A80%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmtid%253D1588%2526kwid%253D1%2526crlp%253D53601919689_324272%2526itemid%253D360750944641%2526targetid%253D124316371209%2526rpc%253D0.21%2526rpc_upld_id%253D45240%2526rlsatarget%253D%2526device%253Dt%2526mpre%253Dhttp%25253A%25252F%25252Fwww.ebay.com%25252Fitm%25252Flike%25252F360750944641%25253Flpid%25253D82%252526chn%25253Dps%2526adtype%253Dpla%2526gclid%253DCjwKEAjwxKSoBRCZ5oyy87DimEcSJADiWsvgEt7EV_MccRHNkepUiHGVMu32S6fvUquD5IHPOGKUGhoCAZ3w_wcB%2526srcrot%253D711-117182-37290-0

Step 2: Done&photos

photos
here is a link the video of my dad using the circuit to drive a drsstc (double resonant solid state Tesla coil) but with the fqa19n60 as the MOSFET. link: cutrippedabs.com/files are/uploads/MOV063.3gp

Share

    Recommendations

    • Plastics Contest

      Plastics Contest
    • Make it Glow Contest 2018

      Make it Glow Contest 2018
    • Optics Contest

      Optics Contest

    Discussions

    0
    None
    Penolopy Bulnick

    4 years ago

    Hey!

    It's great that you have decided to share your photos with us, but we need an explanation of what you made and how you made it before it can be published. Please write up a description of your project and reply to this comment to let me know that you are done.

    Best,
    Nicole
    Community Support Manager