Bubble Light

Introduction: Bubble Light

About: love science and technology

things we need:

1.air pump
2.tube
3.battery
4.battery holder
5.plastic container
6.water with liquid soap

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Cap

first make two holes on the cap,place the light in it and make a hole at center for the bubble to come out 

Step 2: Connection

now connect the light in series connection  

Step 3: Container

now make the hole for tube and wires in the plastic container 

Step 4: Arrangement

now connect the tube  with air pump  and plastic container  

Step 5: Final Step

now pour the soap water in to the container and connect the light with battery 

Step 6: Working

 now switch on the air pump  the bubbles  produce from the water . it can be seen very clearly in the dark room. have fun.

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge

    4 Discussions

    0
    lime3D
    lime3D

    6 years ago on Introduction

    Here's a tip for you... I've made very large scale versions of this for promotional displays. Regular dish soap will actually dissipate over a short period of time. However, if you use "hand soap" with some sort of moisturizer, it will produce tons of suds, and will last a VERY long time!

    2012 parade of lights.jpg
    0
    ssrivastava24
    ssrivastava24

    6 years ago

    may b therd are so many innovator who can modify n make it much better but.....things u produce in front of us is lovely.

    0
    science-tech
    science-tech

    Reply 6 years ago

    thank you