this is our Robot and all the parts we will use to conduct our project.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Building the Sled
we used 11 keps nuts
3 stand offs
14 8-32 1/2 screws
and 4 bearing blocks to hold everything together
Step 2: Finding a Battery
step 2 was to find a battery that was hard to do because people were takeing all of them but we have one and our Robot runs well.
Step 3: What We Used to Put the Robot Together
this is the gears and it is a 36 tooth gear,60 tooth gear and a 12 tooth gear
how this is going to impact our speed its going to make our robot faster so we can carry more weight
Step 4: What Wheels We Used
these are the wheels that we are useing for our robot is called the 100 millermeter to help with the weight we are carrying.
Step 5: How We Build the Base
This is how we builded our platform we used
15 hole angle Bar
we used long sqare bars front and back so the wheels could spin more cordinated
Step 6: Robot Without Weight
This is our Robot when we don't have the weights it moves really fast at the speed on lighting.
Step 7: Robot With Weight
this is our robot when we have our weights on the robot that can carry alot but it goes slow when we have them on.