This case is easy to make and will protect your phone.
You will need duct tape,phone,and scissors.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: 1st Step
First get 2 pieces of duct tape and put them together side by side.
Then flip and put 2 on the other side. (make sure its even)
Step 2: 2nd Step
Place the phone on the tape and trim it down but leave a little extra on the sides and top in the bottom.
Step 3: 3rd Step
Cut a piece of duct tape.
Then cut it in half long ways.
Take one half and cut 2 inches off and stick it on the sticky side of the other one.
Then rap it around i put my under the samsung symbol.
then cut 2 pieces of tape.
then cut 2 inches off again and sick it on the same wayand rap it around the bottom part
Step 4: 4th Step
Now there is extra tape on the bottom.
Cut a piece of tape not long.
Pinch the middle of both right and left ends and flip the top and bottom in and stick the tape on to it so it stays folded.
Step 5: 5th Step
Cut the tape in the back so it is even all around.
Step 6: You Are Done!
Now you have a duct tape case for your flip phone.