Introduction: Nerf Recon C6S Attachment and Dart Mod

Today I'll teach you a mod (more of an attachment) for the nerf recon, and how to make streamline darts.Please don't criticize me if I spell stuff wrong
p.s I don't have a camera so i had to get pictures from the internet.

Step 1: The Mod

You will need the following: one Nerf Strikefire,one Nerf Recon,and lastly you need however many dart tag darts you want to mod.

Now all you have to do is take the green piece on the Strikefire and slide it across the bottom of the Recon's barrel extension.


.

Step 2: How to Make Streamline Darts

step one:Get a normal dart tag dart.
step 2.You need to cut off the edges until the top(orange and black part ) is comepletely cut off.You no you did it right if you see a orange circle inside the dart.

Step 3: The End

If you have any questions then leave a comment and I'll reply as soon as I can.