Gliding Paper Pope Hat

this is my first instructable, so it might not be that good. if you follow the steps right, this should be really easy.

Step 1: Supplies

all yo need is a standard 8.5 by 11 sheet of paper

Step 2: Fold Diagonally

all you do is fold the top right corner down to the bottom left corner, and crease

Step 3: Fold Main Part

take the flat edge, and fold down about 1/2 an inch 4-5 times, and run the folded paper at a 90 degree angle to round out paper

Step 4: Put Two Ends Together

take the right long end, and put the tip about an inch into the left end's opening then tape then together

Step 5: Fly It

take the flat, thin end part the glider, hold it with 3 fingers (middle finger on top w/ index and ring finger on the bottom) and throw it. if thrown right they should go at least 10 ft across a room. (not guarenteed to fly straight)

Share

    Recommendations

    • Epilog X Contest

      Epilog X Contest
    • Safe and Secure Challenge

      Safe and Secure Challenge
    • Faux-Real Contest

      Faux-Real Contest

    6 Discussions

    0
    None
    Lunar1210000

    8 years ago on Step 5

    I BILD A VERZON OF THIS.  I CALL IT THE U.F.P.O.(UNIDINTIFIED FLING PAPER OBJECT

    0
    None
    Loveofchaos

    11 years ago on Introduction

    the pope hats called a mitre. for a funny pope hat scene thingy watch eurotrip lol (ignore this is yerr under 14)

    0
    None
    loopWilliz

    Reply 11 years ago

    These are cool, I've had one go nearly 30 metres launched from the second storey of my house

    0
    None
    krazy gluloop

    Reply 11 years ago

    i hvent gotten that far, but i only fly in the scool halways