Here Is How to Make a Lego Police Truck

4,750

19

4

Introduction: Here Is How to Make a Lego Police Truck

This lego police truck is easy to build. Hope you  enjoy it.Here are the pieces you need.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Step 1

First put the 3 2 x 8 plates on each other.

Step 2: Step 2

Next put the 2 x 2 plate under the 2 x 8 plates.

Step 3: Step 3

Put the axle pieces on the bottom of your unfinished creation. 

Step 4: Step 4

Place the fenders on the front and back of the black plates.

Step 5: Step 5

Put the 4 x 4 plate in between the fenders.

Step 6: Step 6

Place the black piece on the orange fender.

Step 7: Step 7

Put the 1 x 2 plate on the orange fender.

Step 8: Step 8

Put the red piece on the yellow fender.

Step 9: Step 8

Place the 2 brake lights and the licence plate on the red piece.

Step 10: Step 10

Put the 2 1 x 2 plates on each side of the 4 x 4 plate.

Step 11: Step 11

Put the 1 x 4 plate on the 4 x 4 plate.

Step 12: Step 12

Place the 1 x 2 plate on the 4 x 4 plate.

Step 13:

Place the slanted piece on the 1 x 2 plate.

Step 14: Step 14

Now,put on the windshield.

Step 15: Step 15

Put the 1 x 4 plate on the 4 x 4 plate.

Step 16: Step 16

Place the 1 x 2 plate on the yellow fender.

Step 17: Step 17

Put the 1 x 2 brick on the 1 x 4 plate.

Step 18: Step 18

Put the 2 x 3 plate behind the 1 x 2 brick.

Step 19: Step 19

Put the 2 slanted pieces on the 2 x 3 plate.

Step 20: Step 20

Put the 2 blue pieces on each side of the 2 x 3 plate.

Step 21: Step 21

Place the 4 x 4 plate on top of  the windshield.

Step 22: Step 22

Put the red and blue plates on the 4 x 4 plate.

Step 23: Step 23

Finally put the wheels on.

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Rope & String Speed Challenge

      Rope & String Speed Challenge
    • Wearables Contest

      Wearables Contest

    4 Discussions

    I have made a truck like that, only it was more of a bus. Use the cylinders for shocks, put four of them on the wheel block.