Homemade Pratice Balisong (butterfly Knife)

A practis balisong i made to use till im able to get a real one. Used limited tools and scrap wood. Only power tool i used was a drill now that i think about it.

I used cut nails as tang pins. Screws from a Erector set, not because im cheap but because they were smaller. It flips well but may be too light for aerials.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Be the First to Share

    Recommendations

    • CNC Contest

      CNC Contest
    • Make it Move

      Make it Move
    • Teacher Contest

      Teacher Contest

    8 Discussions

    Um, as said above cut nails and small screws. The wood is "sandwich-ply" (don't know the real name" but obviously any wood will work. You can get wood at a hardware store or you could punch trees for it?

    0
    None
    Baddi

    9 years ago on Introduction

    Its pretty cool

    Check mine out
    https://www.instructables.com/id/balisongbutterfly-knife/