Introduction: How to Make a Rainbow Loom Spider Cuff
today I will show you how to make a rainbow loom spider cuff bracelet. It was supposed to be a creepy crawler but it looked like a cuff with four spider's. Enjoy. Don't forget to rate comment and subscribe. And happy Halloween.
you will need
24 x 2 for your border ( due to double banding)
And 52 for the spider's ( due to double banding and four cap bands for the center of the spider's)
I will be using
And mixed metallic bands from the webstore can they have the silicon bands at Minnesota.
Step one do a border but have it straight.
step 2 add a cap band and stretch it to peg 2-3.
step 3 take 12 band's and / it by two (which is 6) o that's how many pegs you need to lay bands but place double bands on those 6 pegs.
Step 4 go into the white band and loop all black bands or loop one
Step 5 now slip knot the black bands that are looped (which Is 6) by looping the bottom two layers.
step 6 repeat 2-5 till you have four spider's in a row.
step 7 add the two cap bands.
step8 loop the boarder
Step 9 take two hooks go down into the two end pegs and take two bands. Then add the clips (mega c clips from the fun loom bands recommended)
Step 10 do a extension but have it be a double coin single. After that loop that extension.
step 11 clip your bracelet together and you are done. Again happy Halloween.