Introduction: How to Make Something Fun and Help the Envirorment
have you ever wanted something that is fun and helpful? well come make this all you need is 1pen, 1 milk jug, a glue gun, and something that can cut. i got my idea from last years pocket sized contest winner.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Milk Jug
get a milk jug and cut it like something like this. then set it aside for a while
Step 2: Get a Pen
get a pen and take it apart. all we need is the front.
Step 3: Get Glue Gun
ok not get the pen and glue it on the milk jug handle you cut out. make sure that the front were the ink is is past the point
Step 4: And Now Have Fun
now you just put it on you finger :} and draw
Step 5: But Were Not Done
now were going to help water your garden ( if you have one) with the milk jug. just get the milk jug and fill the bottom of the handle full of glue or something to seal it
Step 6: Glue the Cap
glue the cap on
Step 7: Fill It Up
fill it up with water i used my sink but you can use anything else
Step 8: And There You Go
and there you go :} you just watered your garden. and saved a buck
Participated in the