In this instructable i will show you how to make home made stickers with a low budget but a high impact. this sticker is not meant to be offensive but is meant to have a great impact, please refrain from commenting about the image on this instructable, if you would like to tell me a comment please do so on deviantart here: http://davej6694.deviantart.com/art/Abort-missiles-not-babies-134697966
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Supplies
- Postage Stamps (I bought mine 50 for $4.99) you could also buy the sheets of sticker paper but that's a bit more expensive
-Printer (if that counts as a tool)
Step 2: Prepare the Stickers
peel the two bottom stickers and overlap them onto the middle one
Step 3: Download the Image
you can download the image i used from here:
(right click > save as > choose destination to save to)
Step 4: Place the Stickers Into the Printer
there should be some way to place them in there (i had to move the paper holder thing... see picture) and make sure you place the sticker face down
Step 5: Prepare the Printer
step 1: hit file
step 2: hit print
step 3: once in the print setup hit properties
step 4: there should be some way to adjust the size of the paper you use ( i have mine set to 5 by 6 inches)
step 5: apply all the settings and hit print
Step 6: Your Done!
slap that thing up! remember its not waterproof so put it somewhere indoors where it wont get wet! maybe a bathroom stall or something, if you want to waterproof it you could package tape to seal it off, then you could put it up on signs and outdoor things...
once again please refrain from commenting on the photo here on instructables if you want to comment on it please do so here: http://davej6694.deviantart.com/art/Abort-missiles-not-babies-134697966