I Am Canadian's AST Pistol Mod





Introduction: I Am Canadian's AST Pistol Mod

i was having trouble getting the firing pin to pull back on his gun without sharpening the firing pin. and i didnt want to sharpen it so for those of you who may have had the same problem... this is for you.

Step 1: The Peices You Will Need

- 1 ball socket or decapitated grey connector

- type A ammo:
2 orange connectors
2 green rods

- type B ammo:
2 grey connectors
1 orange connector
2 green rods

- I am Canadians AST Pistol

Step 2: Taking It Apart

This part is simple if your carful. SO FOR GOD'S SAKE BE CARFUL OR A BIG SCARRY MONSTER WILL EAT YOU!!!

Step 3: Close It Back Up

pretty self explanitory

Step 4: Make the Ammo

-pics 1-3: Type A ammo

-pics 4-6: Type B ammo

Step 5: Loading



    • Stick It! Contest

      Stick It! Contest
    • Water Contest

      Water Contest
    • Backpack Challenge

      Backpack Challenge

    26 Discussions

    another bullet: green rod - orange connector - white rod - dark grey connector

    can someone find a way to fix the red connector problem on this gun? I tried this instructable, but with the decapitated grey on it fires 2 at a time.

    1 reply

    Looks awesome. Need more photos & instructions though... 4/5

    only use rods. the ammo you have is heavier and you can't fit as many in the mag.

    THANKS SO MUCH! dude this rocks cuz i was about to smash this gun to pieces i was getting so pissed off. you are fricken awesome. and thanks knexguy cuz i really need those grey peices so thanks for reminding me. :) 5 stars

    thanks this works really well cos i was really pissed of when i made this cos it didn't work but now it works perfectly !!!

    Not really, the grey will just get cracked. It is easier to then bend it apart than cut it I suppose.

    the reason he made this was because sometimes the firing pin wont pull back because its caught on one of the bullets. but if you twist the firing pin while you are pulling it back, you wont have that problem.