IPhone 4 Speaker Case

Introduction: IPhone 4 Speaker Case

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Finding the Speaker

Go on amazon or go to Walgreens and buy a $7-$10 speaker like the one in the picture

Step 2: Tearing It Apart

You need to undo all the screws and very gent fully take it out of its shell and DO NOT TEAR ANY WIRES

Step 3: Glue It On

From that step you need to heat up your hot glue gun and glue down the battery circuit board and speaker to the back of the case make sure enough room for outlier plug

Step 4: ROCK OUT

Well plug it in and make sure your speaker can still charge and rock on my friend

Step 5: DO IT

Well I'm 14 year old boy and I did this so , so can you and subscribe to my YouTube channel bumbumshack or calvin shack thank u

Pocket Sized Electronics

Participated in the
Pocket Sized Electronics

Be the First to Share


    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest

    2 Discussions


    6 years ago

    Umm not really thin but yes loud make sure you glue down the wires though


    6 years ago

    Is the speaker thin? And is it loud?