IPod Nano Dock




Tired of laying your iPod around? Well this is something you can make with your iPod dock piece you received. Well this is my first Instructable so go easy on me. All I can say is that it's a Lego ipod dock made with 33 blocks (I think). It worked for me and I hope it works for you.

Step 1: The Bottom

What is different from other iPod docks is that mine doesn't have base. It's just blocks stuck together. If you look at the pictures below, you will see.
This is the lay out for the bottom. Just keep it like that. it is 6 by 11.

Step 2: The Middle Layers

The middle part has to be built a certain way. Set it up like this. Look at the pictures for help.

Step 3: Putting It Together

Stack level 2 on level 1, 3 on 2, and 4 on 3.

Step 4: USB Cord

This is something that will make your life easier. You don't have to crack or glue your USB cable. Just tape it. If it looks ugly, the dock will block it.

Step 5: Putting the Back

Look at the pictures.

Step 6: Finish

Done! Enjoy! Leave comments!



    • Arduino Contest 2019

      Arduino Contest 2019
    • Tape Contest

      Tape Contest
    • Trash to Treasure

      Trash to Treasure

    9 Discussions


    10 years ago on Introduction

    Hey I had the same problem with pics begin blurry. I found the macro feature and that will focus on the fines details.


    11 years ago on Introduction

    good, not as complicated or big as some of the others - which is good. good instructions despite an amount of blurryness


    11 years ago on Introduction

    Pretty cool idea, you might want to try using macro mode on your camera. Nice job!