Introduction: Knex Car Launcher Insructions
i have disided to make instruction for my car gun
Step 1: Parts List
total parts=583
connectors
120 yellow 5 slot
11 dark gray 1 slot
8 white 8 slot
26 red 3 slot
62 orange 2slot
rods
34 yellow
6 gray (mine are orange)
15 white
105 green
11 blue
misc.
68 blue spacers
12 small wheels
see below for detailed part list
for the car you will need:
Connector
24 yelllow 5 slot
8 dark gray 1 slot
5 white 8 slot
Rods
8 yellow
Misc.
12 small wheels
total parts for car=57
for the barrel of the gun you will need
Connectors
96 yellow 5 slot
3 dark gray 1 slot
3 white 8 slot
42 orange 2 slot
Rods
22 yellow
90 green
Misc.
64 blue spacers
2+ a strand of four elastic bands
total for barrel= 335
for the trigger and handles you will need
Conectors
26 red 3 slot
20 orange 2 slot
rods
4 yellow
6 gray(mine are orange)
15 white rods
15 green rods
11 blue rods
misc.
4 blue spacers
total for trigger and handle=97
got all the parts then lets get building
Step 2: The Car
just follow the steps and read the image notes
Step 3: The Barrel
smae again just read the notes
beware this is very time consuming and the hardest step of all
Step 4: The Trigger,handles and Extras
just read the notes
Step 5: Putting It All Together
read the notes and your nearly done
Step 6: Attaching Elastics
follow instructions on pictutes