Knex Double Barreled Shotgun

1,492

4

23

When I made this gun I didn't use #64 rubber bands(+I'm really crappy at making KNE'X guns)


it has an 7-8ft range, (If u use #64 rubber bands it may go further)
pinpointer,
&
good (ish) looks



enjoy.....


Step 1: Small Parts,barrel& Trigger

do as the image notes say

Step 2: Handle&installing the Trigger

handle &installing the trigger

Step 3: Firing

Share

    Recommendations

    • Baking Challenge

      Baking Challenge
    • PCB Contest

      PCB Contest
    • Holiday Decor

      Holiday Decor

    23 Discussions

    0
    None
    DJ Radio

    9 years ago on Introduction

    Next time, try making it go 30 feet. Replace the gray rods with black rods (If you have any), and try adding a bullet lock.

    1 reply
    0
    None
    DJ Radiochopstx

    Reply 9 years ago on Introduction

    Not really. After a certain point (say 30 feet), they don't have sufficient mass to continue flying. The first 10 feet it flies very fast, but then it slows down really fast after that point. I made an RBG with a longer and stronger barrel later on, and it got the same range with the same rubberband.

    0
    None
    knexjaycrazyguy13

    Reply 9 years ago on Introduction

    my first gun fired 1 foot but it was just a little gun with like 5 pieces second fairly similar to the 1st but fired 10 feet 3rd farther than 25 ft using low amounts of pieces btw funny avatar