Knex Fmg-9 Instructions

Introduction: Knex Fmg-9 Instructions

About: "Do not try to take control of your life, there is a reason why all the bad stuff happens, so that better things can happen"

EVERYBODY I AM MAD BECAUSE I READ THE COMENTS AND THERE NOT THAT NICE. SO KEEP YOU OPION TO YOUR SELF UNLESS IT IS SOMETHING GOOD BECASUE THIS IS A PROTOTYPE I KNOW IT'S NOT THE BEST GUN OUT THERE BUT I TRYED TO BUILD A GUN FOR ONCE AND ALL I GOT IS SOME RUDE COMENTS. AND YOU PEOPLE KNOW WHO YOU ARE.

pros:
Decent range for what bands i have on it
Small
Not many peices

cons:
Not the best
Two cut peices
Ammo green rods
Needs a magazine if any one can build one please leave a comment and some pictures it would help alot thank you

peices:
Green rods: 52
White rods: 18
Blue rods: 11
Red rods: 1

Connectors:
Yellow connectors: 17
Y connectors: 4
Red 3 slot connectors: 24
White 8 slot connectors: 12
Orange 2 slot connectors: 2
Gray 1 slot connectors: 4
Blue clip: 1
Y connectors: 6
Hinge: 1
Blue spacers: 2
Rubber bands: 3

IMPORTANT!!!!!! READ THE NOTES

Step 1: The Body of the Gun

Step 2: The Front Part of the Gun

Step 3: Putting the Gun Together

almost done

Step 4: Putting Rubber Bands On

so close

Step 5: Done

so now you pull the firing pin back far enough so you can push the bullet in the breech on the top and then aim and FIRE. remember don't point at faces have fun and remember it shots green rods.

Be the First to Share

    Recommendations

    • Puzzles Speed Challenge

      Puzzles Speed Challenge
    • Secret Compartment Challenge

      Secret Compartment Challenge
    • Lighting Challenge

      Lighting Challenge

    67 Discussions

    0
    chevy62
    chevy62

    Reply 9 years ago on Introduction

    so what you think that it is bad

    0
    GTRPLR1995
    GTRPLR1995

    Reply 9 years ago on Introduction

    He thinks everything is bad, He's a very negative person...

    0
    chevy62
    chevy62

    Reply 9 years ago on Introduction

    y does he have to be so mean " i am crying " lolz <( ( ( crayon ) )

    0
    GTRPLR1995
    GTRPLR1995

    Reply 9 years ago on Introduction

    Because he's a NOOB that likes to go around and bash on creations that are more original than his.

    0
    chevy62
    chevy62

    Reply 9 years ago on Introduction

    y does he just go and make guns mod them alittle bit and then the gun is his

    0
    GTRPLR1995
    GTRPLR1995

    Reply 9 years ago on Introduction

    IDK, I mean he did make that cannon thing, but idk, Ima shut up before I get banned.

    0
    GTRPLR1995
    GTRPLR1995

    Reply 9 years ago on Introduction

    It does, but he could learn how to give some constructive criticism rather then saying this is an excuse for a gun.

    0
    GTRPLR1995
    GTRPLR1995

    Reply 9 years ago on Introduction

    YAY!!! Now I get to show the other pros How to give constructive criticism.

    AHEM: Pay attention now RMConstruction.

    I think its a great start for this being your first gun. However, I would suggest maybe building it a bit bigger to fit a mag and to shoot maybe white or blue rods. Also, you need a better handle and I would try to find a different trigger mech. I hope this helps you with future creations.

    ~LF

    0
    MrSillyGuns
    MrSillyGuns

    Reply 9 years ago on Introduction

    roflmao, i thought those were just the basics that everyone should pretty much know

    0
    GTRPLR1995
    GTRPLR1995

    Reply 9 years ago on Introduction

    They are, but noobs dont know those rules.