Introduction: Knex Knife
this a simple and very durable K'nex knife that is very much fun to play with
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Step One
you must gather all of these pieces the black and orange connecter pieces an be in different colors but it has a very cool look if you can get the exact pieces
Step 2: Step Two
take four green pieces and connect them to the white piece leaving one space in between each connecter
Step 3: Step Three
Take 6 pieces of each color from your connectors and start putting them onto the handle like the first picture until you have them stacked like the second picture(i know i only have 5 black i made a mistake
Step 4: Step Four
take a white piece and attach it to the top of the handle like the first picture. Add a green and orange piece to the top of the handle. next add a connector piece of any color under the white piece like in the third picture.
Step 5: Step Five
start adding black connector pieces and put as many on as you can until you reach the top
Step 6: Step Six
make the final piece with the pieces from the list this will be the top
Step 7: Step Seven
connect the piece that you made in the last step to the top of the orange and green pieces and push down on the top to make it fit together.
Step 8: Step Eight
well congratulations you have completed your K'nex knife go out and fullfil your fighter dreams just remember dont poke your eye out... poke someone else's out