Knex Minis, Gun With True Trigger

1,246

2

22

A gun with true trigger made from Knex minis.

Step 1: The Handle

Here's how to build the handle.

Step 2: The Butt

Look at pics.

Step 3: Trigger

Look at pic.

Step 4: Firing Pin

Look at pic.

Step 5: Barrel

Its 3 layers so don't get confused. Look at pics.

Step 6: Assembly

Put it all together.

Step 7: Loading and Firing

Place a gray rod in the slot on top of gun pull back firing pin till it is behind the gray rod then push forward to trigger.

Pull trigger to fire.

Step 8: Hopper

This part did not work out very well but if you want to you can use it.

Share

    Recommendations

    • Warm and Fuzzy Contest

      Warm and Fuzzy Contest
    • Comfort Food Challenge

      Comfort Food Challenge
    • Faux-Real Contest

      Faux-Real Contest

    22 Discussions

    0
    None
    KnexFreekNYPA

    Reply 9 years ago on Introduction

    i was wondering tho are they the same in strength as far as being scaled down goes?

    0
    None
    SelezionaKnexFreek

    Reply 9 years ago on Introduction

    no man, i can snap a half moon in half, and most of my orange micro rods are bent, because they are so fragile.

    0
    None
    knex_mepalmNYPA

    Reply 9 years ago on Introduction

    humour, your first one you wrote *its knek" MICRO! not minis. and they suck.*

    0
    None
    TigerNod

    8 years ago on Introduction

    Not that bad, but this still needs some work. A magazine might be neccesary. And you might want to fill the gaps in the gun. Also, mini knex is not very useful to make knex guns with. But be glad, it is better then all those noob-tubes here on the site...

    0
    None
    Seleziona

    9 years ago on Introduction

    uhhhh, i only have two of those red half moons.... Not like i would build it if i did

    0
    None
    plsBartboy

    Reply 9 years ago on Introduction

    I didn't say it doesn't look like it would work, I said that mini knex aren't great for making guns with.