Knex Transformer Pick-up

3,652

6

21

Published

Introduction: Knex Transformer Pick-up

About: ''Do or do not, there is no try.'' -Master Yoda-


this is my transformer pick-up. i've just posted it with a preview of my next i'm still perfectionising working on it
 remember this is my first ible so please be nice thank you btw the last step is a preview for the next one its almost ready

rmemeber i'm from holland so plz no comments about any grammar or something thank you


Step 1: Step One the Upper Part


okay i've seperated the part in 4 parts so i hope there wont be any confusion build all of these parts. and the 5th picture is a blue rod with a tan clip to it. hold another tan clip for later this instructable.

Step 2: Connecting Step 1


first connect the backside with the top like pic 1.
as you can see the blue rod with the tan clip is in the black/white connector of the top part now add the other tan cliup at the other side of the black connector. now you have the top part ready

Step 3: Step 3 the Arms

arms are pretty easy  but if you have any trouble send me a picture and i'll see what i can do
 take two of pic 1 and save them for later on (its a blue rod with 2 wheels and another small wheel

pic 2,3 are the upper parts make two of these too (i'm sorry about blurry pics i cant help)
 
pic 4,5 are a connection of the first picture4s maybe these are better
make sure the wheels are the opposites of each other you'll see in next step

and now you 'll need the joints and y clips add them and add a white rod

add the as in the pic

Step 4: Body, Face and Legs and Connecting Arms


body is really easy the head too

legs shouldn't be any trouble too

then connecting it first the legs than you will see what i meant with the legs

than add the arms after that you'll have to add the part of step one

with a kind of difficult picture. i'll try to explain take the blue rod of the first step (with the 2 tan clips) and add them plz try to do with pics its hard to explain


Step 5: Almost There Transforming It


Step 6: Preview


this is the other one i've been working on

the picture with them both is for measuring size thank you very much

Share

    Recommendations

    • Backpack Challenge

      Backpack Challenge
    • Clocks Contest

      Clocks Contest
    • Game Life Contest

      Game Life Contest

    21 Discussions

    I was confused on the arms because of the feet looking like the shoulders I folded the body in 29 times and flipping the legs but I got it. Lol

    1 reply

    here is mine but I didnt have enough rims for the wheels. But yah nice it's my first actualy transforming robot! Thanks!

    011.JPG013.JPG014.JPG

    at the green connector of the arms there should be a white rod
    connect that white rod to the blue connector, where the face is also connected to

    DSCF2179.JPG

    thank you everyone for the nice comments but what do you think of the one on step 6???

    your opinion is very important to me thanks everyone

    i've just published a slideshow of ravage https://www.instructables.com/id/knex-decepticon-RAVAGE/ please suscribe