Introduction: Magnetic Nerf Bullets
Have you ever been plying with Nerf guns and had a lot of fun, but when you`re done your mom asks you to pick up all the Nerf bullets and you really don`t want to have to go through all that trouble by bending down and picking them up off the ground. Well now you don't. with magnetic Nerf bullets after you`re done playing and you have to pick up, you just take the magnetic wand and hold it over the bullet and the bullet comes right to the wand.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Inserting the Magnet Into the Bullet
To insert the magnet into the bullet, make a small slit in the top of the bullet and insert the magnet. The magnet should be a Neodymium magnet.
Step 2: Closing the Slit in the Bullet
when you close the slit in the bullet use super glue.when you are closing the slit just use one drop of glue. Once you use the super glue the bullet should stick together for good.
Step 3: Using the Magnetic Wand
when you have the magnetic wand, take it and hold it over the magnetic Nerf bullet. The Magnetic Nerf bullet will go up to the magnetic wand and stick to it due to the magnet in the bullet.
Step 4: Repeat
Repeat steps 1-3 for all of your bullets and you will have an arsenal of magnetic Nerf bullets.
Participated in the