this is my ocarina of time master sword. I don't have many peices so it is a little colorful. I created the handle & hilt, credit for the blade goes to mepain.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: The Handle (good Color)
8 blue 3D
16 puple/grey 3D
19 yellow (I used grey on the hilt for looks)
Again this is my original handle. Follow the pics.
1) finised product
3) make 2
4) make 1
5) handle: make 1 (13 yellows)
will be attached later
Step 2: Blade (very Colorful)
18 blue 3D/white circle
follow the pictures
2) make 1
3) make 9
(I ran out of blue)
Step 3: Finish (yay)
2-3) easiest if you take of white rods at base of blade first
4) attach carefuly at all four points
5) YAY!!! you did it.
(1 more step keep going)
Step 4: Usage Tips (so You Don't Break It :D)
put two fingers in holes at base of blade then grip handle
Do Not Hit People Or Objects.
this sword is built to slay evil. not trees, or siblings :D.
If you hit something with it Link will hunt you down and slay you.