My Knex Bren (instuctions for Mark 2)

1,107

5

17

About: I enjoy building stuff with Knex and real-life materials, I am also a novice 3D modeller, programmer/coding enthusiast who loves Halloween!

these are the instructions for my bren and is my first gun as well i hope you like the gun and please subscribe and rate.

Step 1: Stock

Step 2: Trigger

the handle is going to be modded by beanieostrich

Step 3: Fireing Pin

Step 4: Main Barrel and Body

this is probably the second hardest part

Step 5: Extended Barrel

Step 6: Magazine

Step 7: Bipod

this is optional if you dont want it dont make it =D

Step 8: Attach It All Together

now to attach all the parts

Step 9: Adding Bands and Fireing

this is the last step adding the bands (i used postman bands)

Share

    Recommendations

    • Holiday Decor

      Holiday Decor
    • PCB Contest

      PCB Contest
    • Baking Challenge

      Baking Challenge

    17 Discussions

    0
    None
    knexmaster9

    3 years ago on Introduction

    i forgot to post my version, it had an upgraded handgrip (it was the handgrip of my m16a1) a removable mag, and it was semi auto

    mine shoots quite well.
    maybe try a bigger and stronger elastic band or take the mag off and make sure that there ifs no friction in the barrel and if that doesn't work take out the yellow or grey half moons in step 4 picture ten (that was used in mark 1's barrel) hope this works if not try modding it or building it again.

    0
    None
    knexinventer

    7 years ago on Introduction

    i have made modds to the bi pod cheack out my page and see for you self