Introduction: Rainbow Loom How-to: Zippy Chain
this is a intermediate level bracelet, it can be done quite easily.
Supplies: 3 colours of loom bands, rainbow loom and a hook.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Start by placing two white bands in a ‘v’ shape at the start of the loom.
The place a pink band between the first two bands in the middle of the loom.
Place two blue bands in an upsid down ‘v’ shape.
Place two white bands on the out side of the loom.
Then another pink band in the middle and two blues in the upside down ‘v and then the two white border bands.
Continue this pattern till the end of the loom.
At the end it should look like this.
Flip the loom around so that the end of the loom is closest to you and put a blue cap band on the end peg.
Take the top blue band from under the cap and loop it on to its starting peg, do the same to the other side.
Now do the same to the the other side and the middle peg with the pink band.
Loop the two white bands at the side as well.
Repeat the same process again.
Continue this all the way up the loom.
When you get to the top finish it like this.
Then gather all of the bands onto your hook and pull a white band through.
Then do a single chain, I used about 7 bands and finish with a ‘c’ or ‘s’ clip!
at the end it should look like this:
Participated in the