Introduction: Short Instructable #1: Knex Box Gun, the Only Block Trigger I Like.
Hello, and welcome to my 2nd instructable! This is just a little knex gun my friend Chas made. All credit goes to him. This is the only block trigger gun i like, and it's a block trigger with a twist. I hope you enjoy it!
Step 1: Making the Gun
ok, here goes...
picture 1: piece 1.
picture 2: second view of piece 1.
picture 3: make these.
picture 4: gather these.
picture 5: make these.
picture 6: slide what you made in picture 3 through the hole of piece 1.
picture 7: add the other two pieces from picture 3.
picture 8: do this again in the opposite corner.
picture 9: slide in the two things that you made in picture 5 in the two remaining holes.
picture 10: showing both of them.
picture 11: add rubber bands.
picture 12: showing both of them.
Step 2: Loading the Gun
Now i'll show you how to load it.
picture 1: cock it back and place the blocker in front of it.
picture 2: slide the outter blocker out as far as it'll go.
picture 3: slide a green rod int the end.
picture 4: slide the outter blocker back in place.
Step 3: Your Done!
thank you for viewing my instructable! I hope you enjoyed it and i'm sorry for any bad insructions, miss spellings, and/or blurry pictures.