Simple Fan Holder From Scrap Wood

Introduction: Simple Fan Holder From Scrap Wood

materials:
some scrap wood (10x15 cm plywood)
glue(optional)

tools used:
jigsaw ,scroll saw or bandsaw
pencil

I was tired of this little fan falling out of third hand clips that I used for blowing away solderfumes etc.
 I threw together this is a simple holder to use instead.

Fan is held sligthly tilted so that rotating part does not touch wood. The three parts lock into eachother and glued together(optional)

Share

    Recommendations

    • Metalworking Contest

      Metalworking Contest
    • Creative Misuse Contest

      Creative Misuse Contest
    • Water Contest

      Water Contest

    Discussions