Skateboard Shelf

3,659

135

7

Introduction: Skateboard Shelf

Awesome idea that will make your room with a cool look, and with space to store stuff

Step 1: Drill

drill the ceiling

Tighten the rods

Step 2: Cleaning

Clean old skateboards

Step 3: Put Nuts on the Rods and Add Skateboards

you will need about 32 nuts

Step 4: Nice and Pretty

fill your shelf with stuff you want

this will make your friends envious

Hope you enjoyed

Have fun ;)

DIY University Contest

Participated in the
DIY University Contest

Hand Tools Only Contest

Participated in the
Hand Tools Only Contest

Fix & Repair Contest

Participated in the
Fix & Repair Contest

Be the First to Share

    Recommendations

    • Puzzles Speed Challenge

      Puzzles Speed Challenge
    • CNC Contest 2020

      CNC Contest 2020
    • Secret Compartment Challenge

      Secret Compartment Challenge

    7 Discussions

    0
    gecko_girl3
    gecko_girl3

    5 years ago on Introduction

    I'm assuming you used rods the same size as the predrilled holes in the skateboards?

    0
    Oliorn
    Oliorn

    Reply 5 years ago on Introduction

    Hello, gecko_girl3 actually i did, but they was a little bit stuck so i had to open the holes a little bit more
    :)

    0
    gecko_girl3
    gecko_girl3

    Reply 5 years ago on Introduction

    If the holes were made larger than the rods, did you then insert something into the holes to keep the rods snug? Or use any type of cement to secure them?

    0
    Oliorn
    Oliorn

    Reply 5 years ago on Introduction

    I made the holes with the same size as the metal anchors( rods are Tighten in the metal anchors). if you already have larger holes you can try to use cement to secure, but i recomend you drill new holes with the exacte size of the metal anchors.

    0
    Oliorn
    Oliorn

    5 years ago on Introduction

    And if you enjoyed please feel Free to vote !


    The tablet will really be nice for my university :)


    have a nice day!

    0
    seamster
    seamster

    5 years ago on Introduction

    Nicely done!

    How did you fasten the rods into the ceiling?

    0
    Oliorn
    Oliorn

    Reply 5 years ago on Introduction

    Hello,

    Drill holes in the wall and use metal anchors to the rods