Spinning Mine

1,899

2

7

shoots out little blue rings

Step 1: What You Will Need

20 blue rings
10 white connectors
4 yellow rods
8 yellow connectors
20 green connectors
45 green rods
2 blue rods
2 gray connectors
1 white rod
1 gray rod
1 orange connector
1 tan connector
1 spinning motor

Step 2: The Propeller

this is what shoots out the projectiles

Step 3: The Base of the Mine

this is the thing that spins the propeller

Step 4: Arms and Top of the Mine

this gives a base for the propeller

Step 5: This Is the Arms and Top Connected to the Mine

this is what the mine should look like so far

Step 6: Applying the Propeller

after adding the propeller put on the little tan connecter

Step 7: Extra Pieces

this is the tan and orange connecters and the gray rod

Share

    Recommendations

    • Fandom Contest

      Fandom Contest
    • IoT Challenge

      IoT Challenge
    • Classroom Science Contest

      Classroom Science Contest

    7 Discussions

    0
    None

    also what you can do is put several bars that have the blue spacers on so it has a wider range. Nice mine, though.

    0
    None
    gunmanx

    11 years ago on Introduction

    this should be called how to make a mess with knex lol good mine tho

    0
    None
    Pbyrd

    11 years ago on Introduction

    Finally mine that shoots in all directions and doesn't use rubberbands!!!!!!

    0
    None
    Whaleman

    11 years ago on Introduction

    ya, more people search for knex, and it is a good mine, I had been working on a grenade that ran off of the same principles.

    0
    None
    Kaiven

    11 years ago on Introduction

    hey! add keyword knex and you'll get more attention!