True Trigger Bolt Action Knex Gun

3,282

2

10

Intro: True Trigger Bolt Action Knex Gun

i wanted to make my own true trigger knex gun , so i tried some different i ideas and i think ive come up with a new trigger design. I no the gun is pretty basic but if you want an easy to make true trigger bolt action knex gun this is it.

Step 1: Building the Trigger

the peice is pretty easy to make how ever you may have to force the white rod through the green conector

Step 2: Building the Breach

this step can be very hard to put together i used a screw driver and a hammer to insert the grey rods into all the connectors

Step 3: Building the Bi-pod,block , Main Support and Ram

sorry i havent really included detailed pics on the bi-pod but its really simple

Step 4: Putting It Together

inserting the trigger onto the main support may be a little tricky you may have to use some force

Step 5: The Magazine

sorry not very good instructions if you find it to hard there are many instructions for magazines on this site

Step 6: Rubberbands

rubberbandssssssss

Share

    Recommendations

    • Plastics Contest

      Plastics Contest
    • Audio Contest 2018

      Audio Contest 2018
    • Optics Contest

      Optics Contest

    10 Discussions

    0
    None
    ash1494

    10 years ago on Introduction

    guys shud i post my deagle? its roughly 18 cm . it has a detatchable clip for the handle it is a tru trigger, and its not bulky, but still sturdy.it has a good range and fires green rods, shud i post?

    4 replies
    0
    None
    dsman195276

    10 years ago on Introduction

    not a bad idea for a true trigger, its not new though, just turned a block true.