the world мар is manufactured of 6 breeds of a wood. wenge, larch, koto, American nut, beech, red wood.
wood thickness the 16mm - 25mm
map 2000mm size * 1200mm. the wood is collected on an acrylic basis 6mm.
inscriptions are put by means of a laser engraving.
the map is delivered in English or Russian languages.more detailed video of our production room it is possible to look at
And this: https://www.instagram.com/explore/tags/%D0%BA%D0%B0%D1%80%D1%82%D0%B0%D0%BC%D0%B8%D1%80%D0%B0_%D0%BE%D1%82_mybukva/
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: WE DRAW BORDERS OF THE COUNTRIES IN COREL DRAW
Step 2: WE CHOOSE WOODEN BOARDS
Step 3: WE PACK PARTS OF THE COUNTRIES ON THE BOARD PLANE
Step 4: WE CUT OUT FROM THE TREE ELEMENTS IN THE FORM OF THE COUNTRIES OF THE WORLD.
Step 5: WE DO CONTROL ASSEMBLY OF ELEMENTS.
Step 6: WE CUT OUT THE UNDERLYING CAUSE FOR INSTALLATION OF ELEMENTS FROM ACRYLE 6MM
Step 7: WE MOUNT THE CUT-OUT ELEMENTS ON THE ACRYLIC BASIS.
Step 8: WE ENGRAVE NAMES OF THE COUNTRIES, THE CAPITALS AND THE RIVERS ON THE MAP FACE.
Step 9: WE BLOW OFF DUST AND WE HANG UP THE FINISHED PRODUCT ON THE WALL.
Step 10: LED Lighting (additional Option)
Now an opportunity to make illumination of the world map is available.
From the back party deepening for a LED tape is milled.
The tape is pasted and soldered to a wire from a wall.
Step 11: Box of Plywood
The world map is delivered in a box of plywood.