Knex Assualt Rifle

this is a single shot assualt rifle with a true trigger(tomboyrme) scope and its silent.

Step 1: Barrel

make 10 of these with blue rods but make 3 with yellow then connect six with blue rods toget her then one with a yellow rod then one with blue two with yellow and three with blue.

bbbbbbybyybbb thats the order

Step 2: The Stock/butt

make this

Step 3: Handle

just make from the pics

Step 4: Just Some Part

just make from the photo

Step 5: The Elastic Holder Thingy/front Handle

just add the red rods and orange connecters and other handle

Step 6: Trigger

this is the true trigger, its not my idea its tomboyrmes

Step 7: Scope

just make from the pictures. and the scope is just for looks dont accually use it to aim cuze youll end up breakin something

Step 8: Putting It Together

just look at the pics

Step 9: Loading and Firing

just snap a bullet into the yellow rod of the trigger (the bullets are 2 yellow conectors conected by a whit rod) then attach the rubberband as shown then just pull the trigger back, the other pics are of the ammo stored in the bcak of the gun (holds 4)

Comments

[jmm72]

i like how the handle has finger holds

[knexguy]

You can't have a single shot assault rifle. Also, it is hard to make a knex gun that is not 'silent'.

[iKill]

actually its kinda difficult to make one that IS silent try building some good guns then you'll see

[An Villain]

any with a pin are not silent.

[knexguy]

I know, but this achieves it by using a crossbow-like mechanism, not silencing the pin (muffling the noise of the pin hitting the outside of the barrel wit elastic bands etc.)

[ooda]

Exactly what I was thinking.

[Fudgey13]

i built and tried this gun several times, it used up all of my yellow connectors, and it fired a maximum of 5-6 feet. Did I build it wrong or does it just have bad range?

[backyardpyro217]

I can relate, I cant even build half the guns i want to because I dont have enough peicesand half the ones I can make suk

[bounty1012]

XD same here >.>

[ILIKEPIE333]

I hear ya, brotha.

[slywolf28]

is this even needed?

[bounty1012]

love the gun Btw 5/5 faved

[bounty1012]

better instructions plox?

[kooltrent]

hey k-man101 are u from ontario???

[MI6]

mmm... the bullets are not good , put an orange connector on the white rod , the a rod on that perhaps.it is gd though, its a shame its only single shot

[pls]

i love the handle.

[k-man101]

acully this gun is all my design but the trigger

[cobra]

are you talking to yourself? I would build this if it had a magazine

[k-man101]

ur elastic must have been to big

[anner 2k7]

i was wondering when someone would come up with this stock design