Knex Buggy Independent Suspension and Steering

by danymw

10K2135

Intro: Knex Buggy Independent Suspension and Steering

Knex buggy with independent (4) suspension and front wheel steering.
Try to build the same parts you see in the pics.

STEP 1: Parts List

approximative

STEP 2: Main Chassis

build this. there are 2 big parts, and 2 small parts.

STEP 3: Steering System (SS)

build all these.

STEP 4: Supports of SS

assemble the parts you have and it must look like this

STEP 5: Top Cover

put the second big part on the others and connect them.

STEP 6: Some Things

 add the blue and purple connectors in front of the car as you see here

STEP 7: Front Steering

build exactly TWO (2) of these, symmetrical. it is step by step and if followed, it should get right

STEP 8: Front Suspension

try to get it similar

STEP 9: Big N Tricky,rear of the Car

 there are two that means you must have to parts exactly the same but symmetrical. 

STEP 10: Rear Suspension

 with or without rubber bands!!

STEP 11: Spoiler,wing Thing

STEP 12: Last Things

 front wheels,remove from each side a white rod and put a blue rod

35 Comments

knexguy237 9 years ago

Dude this thing is freakin' awesome!....5 stars for sure! Nice job.

the_boss_builder 12 years ago

in the steering "rod" do you have to cut the peices????????!!!!!!!!! also its awesome 5* for sure

itzandy 11 years ago

i tryed not to but it dont fit if you dont so i used some old broken ones lol

the_boss_builder 11 years ago

alright but as i said i ended up cutting the pieces any way but its nice to know that it wasnt just for nothing

danymw 13 years ago

it's good now.
i can't even believe i wrote those awful bubble-texts.noob

the_boss_builder 12 years ago

danymw is totaly rite the steps are super easy it took me only like 1 hour to build but the bubble texts can be helpful at times

Lowney 12 years ago

This is pretty awesome, nice job there :)

kylebusch18 12 years ago

do you need the middle thing in the middle in pic 2

james4 14 years ago

whats behind

danymw 14 years ago

 i forgot, but i think it was a bad part, not easy to make

james4 13 years ago

don't worry i figured it out

millju 13 years ago

i have remade this buggy and put front and BACK stering now it is even better !!!!!!

mosky 13 years ago

I have taken this buggy of base and have made one f1 with suspension and direction, the problem is that I lack wheels and the photos not to be raised.

perloo 14 years ago

how do you do the steering system?

danymw 14 years ago

 see every step. if you build all parts,you will have the steering wheel, it's not that hard to make
More Comments