Knex Golden Gate Bridge+instructions
Intro: Knex Golden Gate Bridge+instructions
well, here i present the second version of my knex bridge. this one is a model of the famous golden gate bridge. it has two large support towers, and two railed roads.
STEP 1: Instructions
the bridge has two pilars, they are equal, and 4 road parts are equal too.
part list:
gray rod: 160
red rod: 213
yellow rod: 448
blue rod: 86
white rod: 100
green rod: 40
white connector: 56
purple connector: 292
yellow connector: 361
green connector: 114
red connector: 728
gray (2) connector: 8
gray (1) connector: 70
orange (2) connector: 411
orange (5) connector: 21
rod end clip: 72
tan chain connector: 32
chain links: 376
total: 3215
part list:
gray rod: 160
red rod: 213
yellow rod: 448
blue rod: 86
white rod: 100
green rod: 40
white connector: 56
purple connector: 292
yellow connector: 361
green connector: 114
red connector: 728
gray (2) connector: 8
gray (1) connector: 70
orange (2) connector: 411
orange (5) connector: 21
rod end clip: 72
tan chain connector: 32
chain links: 376
total: 3215
STEP 2: Pilars
STEP 3: Road
you know: make 4 of these
STEP 4: Cables
STEP 5: Put Everything Together
now you can put everything together
STEP 6: The Final Part.
you need this to connect both bridge parts.
STEP 7: Well Done
congratulations, now you will know it's very big. :)
13 Comments
LittleBilly 7 years ago
rathemighty 12 years ago
martijnb95 12 years ago
KneXtreme 12 years ago
The Chunky Sniper! 12 years ago
martijnb95 12 years ago
TheAwesomestDude 12 years ago
beanieostrich 12 years ago
martijnb95 12 years ago
beanieostrich 12 years ago
martijnb95 12 years ago
beanieostrich 12 years ago
martijnb95 12 years ago