Knex Ipod 4th Gen Dock
Intro: Knex Ipod 4th Gen Dock
I got bored one night, so i started looking for knex docks for random things.
There was nothing for the 4th gen ipod nano
I decided to make one
p.s. this is my first instructable so dont critisize much
p.s.s. I call it the "Chariot" because it looks like one.
There was nothing for the 4th gen ipod nano
I decided to make one
p.s. this is my first instructable so dont critisize much
p.s.s. I call it the "Chariot" because it looks like one.
STEP 1: Gather These
you will need:
6 blue rods
2 small white rods
3 yellow rods
2 red rods
6 white connectors
5 yellow connectors
4 green conectors
2 red connectors
1 orange connector
6 blue rods
2 small white rods
3 yellow rods
2 red rods
6 white connectors
5 yellow connectors
4 green conectors
2 red connectors
1 orange connector
STEP 2: Make These, Simple Enough
make 2 of these each
STEP 3: Still Kinda Simple
not that hard to make and really no explanation needed''''''
STEP 4: Make This Next....
make this piece next
STEP 5: ...then Attach
next you just attach it to the other piece like this
STEP 6: Remember These?
Remember these?
attach them like this
attach them like this
STEP 7: Almost Done
just make this
it is the last piece!
it is the last piece!
STEP 8: Connect the Last Piece
just connect it like this and your done
STEP 9: It Should Look Like This...
When you put your ipod on, it should look like this..
STEP 10: Or This
or this
and your done
and your done
Comments
hying 12 years ago