Knex L98
Intro: Knex L98
This is the gun from the forum I posted a while ago.
It has a new way of being built.
This is because the mag is behind the handle, and still works fine.
Don't forget to comment and rate it please.
It has a new way of being built.
This is because the mag is behind the handle, and still works fine.
Don't forget to comment and rate it please.
STEP 1: The Stock.
A new stock of my own invention.
STEP 2: The Mag
azine.
Curved and working.
It loads blue rods from the bottom.
The pusher is a red rod, with a yellow connector perpendicularly attatched at one end, with an orange connector at the other.
Curved and working.
It loads blue rods from the bottom.
The pusher is a red rod, with a yellow connector perpendicularly attatched at one end, with an orange connector at the other.
STEP 3: The Barrel
This is where the bullet enters the chamber.
STEP 4: Scope
This is a scope. Have you ever soon one before?
STEP 5: The Handle
Yes, the rubber bands are necasser.
STEP 6: The Part
That is so called Mr. barrel.
Very frictiony :)
Very frictiony :)
STEP 7: The Front Bit
Which doesn't yet have a name.
STEP 8: Connections
This is where you put the gun together.
Any issues, pm me.
Any issues, pm me.
STEP 9: Rubber Bands And
Any other pictures I have left over.
These pictures show where the rubber bands go and what you may want to add, if your trigger is slightly un-reliable.
These pictures show where the rubber bands go and what you may want to add, if your trigger is slightly un-reliable.
109 Comments
knexsuperbuilderfreak 14 years ago
CuddlesMcT 14 years ago
bobwuvspie 14 years ago
CuddlesMcT 14 years ago
daz108 15 years ago
j-chode! 15 years ago
J Moneyman 15 years ago
ILIKEPIE333 14 years ago
j-chode! 15 years ago
daz108 15 years ago
j-chode! 15 years ago
daz108 15 years ago
j-chode! 15 years ago
ILIKEPIE333 14 years ago
j-chode! 15 years ago
ashchetm 14 years ago
randomstake17 15 years ago
knexguy 15 years ago
ILIKEPIE333 14 years ago
knexguy 14 years ago