This is a strong and easy to make knex muzzle-loaded musket.

This is my first instructabe, so please go easy on the comments...

Step 1: Pieces

This is what you will need

Step 2: Barrel

follow this picture to make the barrel

Step 3: Handle and Trigger

again follow the piture

Step 4: Put Together

the tittle explains this step

Step 5: Extra Peice

add this small peice in where the trigger meets the barrel

add a tight rubberband around the peice and where the barrel is

Step 6: Bolt

again again follow the picture

addd duct tape

Step 7: Stock

do i even have to say it...

Step 8: Putting It All Together

attach the stock and the bolt

Step 9: Rubber Bands

put a small band in the trigger another wher i said earlier and i put three bands on the bolt all the way down the length of the barrel.

Step 10: Loading and Fireing

take one of the blue rods off of the barrel then put it in the barreland shove it down with long grey rod.

you can attach the gre rod on the bottom of the barrel inbetween the two white peicesresting on the greay end peice and have the other side attached on the barrel wit a moveable joint peice like seen in the intro