Introduction: Knex Pistol
More by the author:
About: Hey there. I won't add too much info here, as it'll show up as one big paragraph. I'm not super active anymore, on here.
hi there! I showed beanostrich a pic of my pistol and i decided to post it now, so here it is!
pro's:
- looks cool
- very comfortable handle
- shoots about 40~50 feet
cons:
- single shot
- nothing very new
pic1: whole gun
pic2: pulls back pretty far
pic3: strange first-person shot
pic4: aiming down the sight
pro's:
- looks cool
- very comfortable handle
- shoots about 40~50 feet
cons:
- single shot
- nothing very new
pic1: whole gun
pic2: pulls back pretty far
pic3: strange first-person shot
pic4: aiming down the sight
Step 1: The Handle
this shows you to build the handle of awesomeness (not realy)
1: what thou shalt build
2: gather/build twice
3: get 6 white rods
4: add those rods
5: build
6: add
7: add those things from photo 2
8 build
9: add
10: build those plates, they make the hanlde comfortable
11: add on both sides
12: add on both sides
13: you finished the handle :)
1: what thou shalt build
2: gather/build twice
3: get 6 white rods
4: add those rods
5: build
6: add
7: add those things from photo 2
8 build
9: add
10: build those plates, they make the hanlde comfortable
11: add on both sides
12: add on both sides
13: you finished the handle :)
Step 2: The Barrel/body of the Gun
time to build the part where the magic happens!
1: look! it's a barrel
2: build it
3: get those rods
4: add them
5: trigger and inner parts
6: add the trigger
7: it;s a close up
8: add it
9: add that one too...
10: ...and the last one
11: add, i suggest you to add it part for part
12: build the panels
13: add the big ones on both sides.
14: then those on both sides..
15: and slide those in from the front to let the most low panels stay on
1: look! it's a barrel
2: build it
3: get those rods
4: add them
5: trigger and inner parts
6: add the trigger
7: it;s a close up
8: add it
9: add that one too...
10: ...and the last one
11: add, i suggest you to add it part for part
12: build the panels
13: add the big ones on both sides.
14: then those on both sides..
15: and slide those in from the front to let the most low panels stay on
Step 3: Build It!
it's peanut butter building time! (← sorry for that)
1: get the barrel and handle
2: take of the sideplates from the barrel and handle, then detach those handle rods
3: attach the handle
4: then put the rods from picture 2 back
5: get those rubberbands...
6: ...and attach them to the trigger and barrel as shown
7: put barrel plates back on
8: also attach the handle plates
9: finished the main building! :)
1: get the barrel and handle
2: take of the sideplates from the barrel and handle, then detach those handle rods
3: attach the handle
4: then put the rods from picture 2 back
5: get those rubberbands...
6: ...and attach them to the trigger and barrel as shown
7: put barrel plates back on
8: also attach the handle plates
9: finished the main building! :)
Step 4: Loading, Ammo and Ram Rod
time to finish it up and have some fun:)
1: make the ram rod, use a clear or black rod if you have one
2: get those
3: and attach them, damn thats hard to do, isn't it?
4: get your gun and the ram and some ammo
5: slide the ram in
6: get some bands
7: 1st band
8: for the secon band, attach so...
9: .. then pull it back like this
10: to load it, pull back the ram, then slide ammo in
11: ''click'' it into the blue connector
12: aim...
13: keep aiming...
14: BOOM headshot!
1: make the ram rod, use a clear or black rod if you have one
2: get those
3: and attach them, damn thats hard to do, isn't it?
4: get your gun and the ram and some ammo
5: slide the ram in
6: get some bands
7: 1st band
8: for the secon band, attach so...
9: .. then pull it back like this
10: to load it, pull back the ram, then slide ammo in
11: ''click'' it into the blue connector
12: aim...
13: keep aiming...
14: BOOM headshot!