Introduction: K'nex Tank Instructions
Hello!
Here is my first instructable. My brother helped me to build this and make the instructions. Thanks for building/looking at this!
I will take this from least complicated to most complicated. Follow the notes because it will make it a lot easier.
Have fun! :)
Some facts:
this tank was made in one day
the pieces are all metallic (except for 4 green rods)
Step 1: The Treads
The most important part of the tank... without them it wouldn't be able to move!
Step 2: The Muzzle
What's the point of a tank if it can't shoot?! Here's the thing that actually does that! (it doesn't actually shoot)
Step 3: The Body
What's the point of a tank if you...can't sit in it! Here's the place that your imaginary person sits. You may be able to sit on it, but not in it. It's too small.
Step 4: Putting It All Together
Here we will put all the pieces of the tank together, The last part of the assembly line! Finish this step and you will have a replica of a tank...and you won't have to spend so much $$$! This is somewhat difficult so pay attention! Have fun.
13 Comments
6 years ago
nice tank! :)
Reply 6 years ago
Thanks!
7 years ago on Introduction
Nice build!
Reply 7 years ago on Introduction
you should see this K'nexer https://www.instructables.com/member/www139/ and this: https://www.youtube.com/user/knexguy139/videos
he's really cool! :)
Reply 7 years ago on Introduction
He is pretty neat. Wish I had more parts so I could build ball machines!
Reply 7 years ago on Introduction
thanks! :)
7 years ago on Introduction
I am building a knex marble machine and then I am going to make a ball machine!
7 years ago on Introduction
Looks good!
Reply 7 years ago on Introduction
thanks!
7 years ago
Neat! This is a great build! :D
Reply 7 years ago on Introduction
thanks!
7 years ago on Introduction
Cool tank design.
Reply 7 years ago on Introduction
I looked at several tanks and came up with the design. Thanks for saying you like it!