Objet 3D Printer Class
Lesson 7: Operating the Object Connex 500
Ask a Question

Introduction: Operating the Object Connex 500

Use this lesson as a reference for order of operations when cutting on the Epilog Laser Cutter.

Area and Machine Preparation

  1. Prepare the model.
  2. Select a printer.
  3. Insert (open) the model.
  4. Set tray and material options.
  5. Send the tray to the Job Manager.

Printing the Model

  1. Run the Job Manager.
  2. Bring the printer online.
  3. Record the resin usage.
  4. Start the print job.


  1. Remove your part from the machine.
  2. Clean the machine.
  3. Clean your part.

Print Out This Guide

This course is available as a PDF that is attached to this step. Happy printing!