Golf club travel case

Has anyone turned a golf bag into a golf travel case. Looking for suggestions for perhaps a hard top to go onto golf bag so I can put on a aircraft or move to another location.

Topic by deeboz 


how do i make a go kart?

I am also 14 years old and i really need to know how to make an awesome go kart without an engine but will bee really cool. plus i dont have any money to spend on parts!

Topic by boedogs   |  last reply


would any one like to

Would any one like to make with me a bull pup assault rifle see over the time I have found that I am better a modding other people's work or make odd mechs (like my arrow gun. but I have never been good at making mag feed guns. If there is any one (or multiples)  who would just pm me or say it in a comment.

Topic by ninjusk   |  last reply


Knex Juggling prop stand

Just a little stand to hold some of my juggling props. Takes 3 clubs, 5 rings, 3 medium balls and 5 small balls. I know I know, it's not the most outstanding thing I've ever built, but I thought is was cute... IaC

Topic by I_am_Canadian   |  last reply


What is the best and the worstest game?

Have your say on one of the game: A B C D E F Final Fantasy F1 [EA] Football [EA] Fittness Coach G Grand Theft Auto Gran Turismo H Heatseeker I J Jackass K L Little Big Plantnet M Mario N Need For Speed Nanuto O P Pokemon Q R Red Ball Challange S Sonic Sim City Super Smash Bros. Street Fighter Scribble Nount Star Wars T The Sims The Bible Story The Simpson U V W Wii Fit Wii Sport X Y Z  

Topic by wat.   |  last reply


*Instructable posted 11-2-10 see it now Mezak vs TheDunkis' Oodassault Pistol Version 3.6 I say HOW ABOUT BOTH

I proudly present to you TheDunKILLMeZak gun! lol idk just thought the name sounded funny anyways ive been pretty bored the past few night and had time to build after building both the MeZak and TheDunkis' Oodassault Pistol Version 3.6 i found a lot i liked about both guns and a lot i didn't like about both guns so i started modding... several hours later i ended up with this im not finished with it but it is basically TheDunkis' Oodassault Pistol Version 3.6 with MeZak's mag i modded both up a bit until i got the gun i was hoping for when i first built em both one key feature is the rubberband tightly wound around the bottom of the mag this applies pressure to it ensuring the mag pusher stays securely locked in place when pulled the mag tilts back as always however this time it stays in place on its own once loaded up just flick the mag forward and the mag snaps back into place and actually locks a bit which will forever prevent the mag from bouncing around when running or whatever anyways obviously credit goes to TheDunkis and Mepain and Zak and whomever else wants some credit... anyways i hope you all enjoy the mods and ill mostlikely continue working on the gun to improve it some more btw id love to here your feedback on the design let me know how it goes for you and GOOD LUCK! stripper clips! thanks for the ideas TheDunkis' n bakenbitz NEW vid up on youtube http://www.youtube.com/watch?v=3DoCIkfMSxU btw i think im going to attempt to make a shotgun attachment for this gun that would mount to the top 11-1-10 *NEW pics NOTICE how the white rods are alternating in pic 3 this strengthens the gun further

Topic by Knex Lego Maniac   |  last reply


M16 Replica

 

Topic by GrandeSwag   |  last reply


My Knex Ball Machines

These are all of my Knex ball machines. I got interested in building them in 2007, when I built my first working ball machine, the Spiral Plunge. I thought I'd add my earlier machines, which were built before the Death Trap. Some of their pictures are below, but not all of them. The rest can be viewed here: www.knexforum.com/members/shadowman/albums/my-knex-ball-machines-before-death-trap/ I also have videos of them right here: www.youtube.com/user/39Shadowman#grid/user/8324FF1BE969C097 Here's the ball machines that I have videos for: Here's my official gallery of these machines. Click here to see more videos: http://www.youtube.com/user/39Shadowman

Topic by Shadowman39   |  last reply


Warbow

(Sorry for the blurry pictures, it's not very easy to aim a camera that's part of your watch.) Not technically a crossbow, but it's based off the Heavy Crossbow's barrel and trigger. This is not your secondary war weapon. Nor is it your primary. This is your "I'M GONNA FREAKING KILL YOU FOR WHAT YOU JUST DID" gun. It moves a red rod with a grey on one end and a red with a green rod on the other faster than my eye can follow. It doesn't have particularly long range as far as I can tell, but that's because my room isn't very long. It did, however, put a good size dent into what is for other things a nigh-indestructible door with the lightest ammo that it can fire.  I'll post this if enough people want it, which I place at about three for a slideshow showing how the insides work and six for an actual 'ible. Please note that this thing is too complicated to build from the pictures due to the casing of the mechs and the unique way the barrel is made. EDIT Posting tomorrow, have pics. Also has a just-implemented third firing mode, "booby trap", which holds the front trigger at its extreme forward and when the pin is pulled allows the trigger to shoot backward, firing the gun. Basically a game breaker, because it'll end up shooting them in the soft part of their side if it's at a proper height to be set off by walking.

Topic by mettaurlover   |  last reply


How often do you exercise? And what do you do? If not, what's holding you back?

I'm just curious. I guess I'm always curious about other peoples' health habits... you know, being in public health and all. So do you exercise? How long, how often? What do you consider exercise? And if you don't exercise, why not? Right now I'm doing yoga once a week for two hours, and cardio for at least 30 minutes every day, along with weights every now and then. I do them randomly. I probably should be more calculated about that. I guess you guys can considered this extracurricular activities on my part if it makes you feel better about all the questions. :P (Also - work it, Richard!)

Topic by jessyratfink   |  last reply


Thanks for halloween 2010!

Hello out there! I just wanted to say thank you all that are posting all the great things you do. And in some cases just for images laying around, they have given me alots of fun. This is how I turned out halloween 2010 and it turned out to be a great halloween for me with alots of fun. So keep it up everybody. Thanks you!

Topic by Suizezem   |  last reply


So.... What should I do??

Hey guys, So I have no idea what to build right now. I am 100% out of ideas.. So what do you guys want me to build??  Do you want guns or do you want non-gun things?? If so what... Please give me some ideas, Killer~SafeCracker

Topic by Killer~SafeCracker   |  last reply


Knex Grappling Hook

I had an Idea. Basically, you have a lame set of grappling hook arms that dont Do anything, well change it so that when the hook hits the object, it closes the arms....block trigger perhaps. I know I Am Canadian, Shadowman ect would be able to design and build this in like 30 minutes, but i was thinking someone could give it a try...im working on it too! Thanks in advance Hedzup456

Topic by hedzup456 


Pulse Knex Ball Machine

This is Pulse, a Knex ball machine that I built because I was BORED AS HELL. It has two paths, and a newly-designed ball rack at the bottom of the lift. I also altered the ball claws on the chain lift. If there are a lot of requests for instructions, then I may make instructions. PICTURES: http://www.knexforum.com/members/phrasmotica/albums/pulse-knex-ball-machine/ Enjoy! -phrasmotica- Here's the video:

Topic by DELETED_phrasmotica   |  last reply


Connecting Yellow and blue Rods???

I have a cube made out of Yellow rods and one made of Blue rods. Each have part of a ball machine connect to it. Is there an easy way to connect the Yellow and Blue parts? I have been trying different things, but nothing makes me happy? Can anyone help??

Topic by imans314   |  last reply


Asteroid Belt update 1

So far i have a new lift done, and the main base done. Sorry for no pictures of the base, but next update will pictures of the whole thing! :) next update is on Thanksgiving!

Topic by Purple Waffles   |  last reply


Why We Love Hiyadudez

Well for this forum I would like everyone to say why they joined this group. :) TB

Topic by Tom Buckey   |  last reply


My new assault rifle

Well, Hello. This is my new assault rifle. I made this in about 3 hours. It turned out much much better than I expected. It shoots about 40ft but it has a very good strong trigger so maybe 50ft. The trigger block in the barrel works like the way Pooplord's Lever action pistol does. It requires no cut pieces although, my one has some on it. The mag is removable but its a little bit hard to do so.  I might post it, might not. Sorry for the bad(ish) picture but I was using my phone. Adiós Amigos.

Topic by Millawi Legend   |  last reply


Killswitch on a bass

I've been considering equipping a killswitch to my bass guitar. Think it would be worth it? And could it simply be installed by hooking a button switch to the pickup wires?

Topic by wingman246   |  last reply


Injury prone people

Share your scars here! Injury pics are awesome! Are power tools involved? Is glass involved? How about metal? Knives? Beware, I have no control over what people post, there might be some graphic stuff.

Topic by The Ideanator   |  last reply


Please help

Could you please vote for me, it takes no time at all, and its a big help. https://www.instructables.com/id/Stop-Karate/ Thank you.

Topic by knex gun builder freak   |  last reply


Your Most Painful Moments.

I was wondering with all the home crafted weapons what you would classify as the MOST painful moment in you life so far. When were you in the most pain of your life time, was it after being shot with a paint ball gun or when you stubbed you toe against that stupid door. Ohh and once you have remembered remember to give it a pain rating from 1 to 10, 1 being not too painful and 10 extremely painful. I'm sorry if it brings back bad memories but i was just interested. My most painful moment was when i was playing cricket we used to whittle out points to make the stumps then flick them in to the ground, one time i over judged it and it hit me hard on the shin I sat with an ice pack on it for about 2 hours and had a lump the size of an egg!

Topic by Mr Tenacious   |  last reply


Time for some change

It's time to change my room around and I'm clueless now because I've changed it pretty much every single way. The picture below is how it's currently arranged, professionally done in PS. Could anyone give me any ideas for arranging it differently? My desk is a corner unit, sorry all I could draw is a square, too lazy to freehand. Thanks in advanced.

Topic by Punkguyta   |  last reply


Knex update- 10/19/2010

I realize a lot of people are disappointed over my last forum topic and got really pissed off at me. So to make up for it, I am showing you a video of my latest knex project- It is not finished however, because I don't have as much time as I used to. This was the fourth day of building my Halo battle rifle, I have made much more progress on this gun since the video was taken. I was originally going to put this in a huge "Making of" video with a bunch of other clips but my iPhone 4 got confiscated today by my French teacher, so I can't do that until November 4.

Topic by DJ Radio   |  last reply


Knex MP5K review.

this is shadowninja31s MP5K review. comfort:6/10 - its quite uncomfortable at the back of the handle, but the grip is fine. power: 8/10 - for close range, its got alot of power. looks: 10/10 - probably one of the best replicas ive seen. innovation: 8/10 - nothing new, its got removable magazines and other features. accuracy: 9/10 - its very accurate at close range. piece usage: 8/10 - not to much pieces. strenght: 9/10 - very sturdy, the magazine is the only weak point if dropped or hit. reliability: 9/10 - nearly every time the bullet leaves the barrel, if you use a tight rubber band on the magazine pusher all the shots will leave the barrel. also, if the band is too tight on the trigger the rod may snap off every like 100 shots, just replace it. overall: 67/80 - if you want a great replica with power, make this! link: https://www.instructables.com/id/MP5K/

Topic by ~KGB~   |  last reply


Seat Belt Handle

My grandpa has a hard time reaching over his shoulder to get the seat belt. I was just wondering if there is some sort of strap to make it easier to get your seat belt on WITHOUT damaging the car.

Topic by rexdino5   |  last reply


Myspace Music Profile

Check out my music. http://www.myspace.com/kyledurkinmusic

Topic by Oblivitus   |  last reply


Message to the K'nexers

A Poem I write to you of my observations About certain peoples' latest creations Yes this has been said before About this endless comment war The Jamalam and of course I.A.C Have seen the same things as me But they both wrote in regular style Which never stuck: not versatile So I write to you in poetry But the views are same, we all agree But my rhymes will stick into your brain The frontier in this web campaign See I notice that our knex community Lacks complete and utter immunity To spite, hate and lack of respect To many peoples' knex project It's mainly guns, but there are others too That are attacked in a ridiculous taboo That's taboo as in prejudice, you see It's gone beyond reasonable degree K’nex is a toy, don’t forget That fun really is the main object So why all the hate so suddenly It puts ya down, can’t you see? People like me, and naming others too Get ratings based not on what but who Why rate so low based on the person The situation is starting to worsen Insane Creator is one of those Who gets nought with a five in endless blows Upon his models: they ain't that bad It's who he is, it's really quite sad See why would you rate if you had no idea Of the thing you are rating: It's still unclear What would posess you to continue this theme In lowering someone's self esteem It's not just ratings, to me they ain't worth it It's the comments people think, write and submit "What the heck? This is so bad" to name an example But it's one of hundreds: a mere sample Regulars are praised, no matter what they do IAC; Killer~safe cracker to name a few True, they are good, I won't put them down But what about the other side of this web town? If I should have posted Mr. Doomsday Or put that cablecar on display They would never have got to where they are now Because I ain't as regarded, why should we allow? Allow for this rudeness and all this spite To continue all day and all through night We were never like this, can you remember? Time for a little bit of nostalgia? Once upon a time, the community was  Supportive and friendly simply because We wanted friendships and much better outcome And to spitefulness? we never did succumb! So I say please return to how we were Helping every other entrepreneur Not attacking others like wild bulls: Please, “show a smile instructables!”            -Lowney

Topic by Lowney   |  last reply


KNEX COLT 1911

I've been cruising the site for any knex pistols that either are a 1911, or look like one. So far, I haven't found any. So, I thought I'd post a topic for it and see if anyone had any ideas, or if anyone wanted to make one, ore do a joined project (shared credit). I'll be making my own to, but I could use some input. Tell me what you guys think.

Topic by the_builder   |  last reply


XXX?

Hey, I've been sober for over a year edge for 6 months or so. I'm typically Posi most of the time but not all the time haha. Realized there wasn't a thread on this so I started one. Just wondering how many people on this site are Straight Edge? Posi or otherwise. Feel free to question me or argue about it with me. Here's a wiki if you didn't know Here's a Nat. Geo. that sums it up pretty good

Topic by TheCheese9921   |  last reply


Any ideas for an easy diy open top dining table/ desk ?

Can anyone point me in the right direction?  I'm looking for an easy to make open top table (like ikea's Vika Veine) for each member of my family.  If i could get 4 or 6 spaces put together, that would be GREAT!  We could use it for work and school (open) and then just close it when we are ready to eat.  I'm a novice and would love to get some instructions on building this...would it be possible to do with ikea's LACK tables...using 8 and then adding legs and some hardware?

Topic by hudsoncs   |  last reply


Unbelievable.

After the vast amount of time that i had been going down in Instructables, Slowly dipping under the so-called radar.. I come back here and find that my guns are still on the front pages. This i find incredible. I just want you guys to know, even though i'm not online as much as usual.. big shoutout to you guys for not letting my spirit of Kne'xing die. Peace -Vic-.

Topic by Skreetsha   |  last reply


Knex sniper rifle

HI. This is my new knex sniper rifle that i made. Here are some features. 1 the ram dosent fall out, the ram dosent stick out of the gun, begging true trigger, fires yellow rods, powerful, sturdy desine for minimum breaking, recoil is in the mid to balance it out, detachable tripod or bipod, and its longer than my paint ball gun. Here are some pics, if you like go to dannys fourum topic and vote on it.here is the pic order.1 as you can see this sniper is longer than my paintball gun2 Hahahahahah i got more knex than yoooouuuu!!! =P3 this is the trigger mechinisum when its not pulled. 4 Sorry for the blurry pic but this is the trigger when pulled.5 looking at the stock of the gun.6 The front7 The chamber where you put the rods in8 a last look at the trigger mech.9 the whole gun. Beuty eh?I hope you like this, dont forget to vote on this in dannys fourum.

Topic by knex hater hater   |  last reply


lolyoutubenoobs

Most of us have had this happen. Someone takes a gun of yours they like, modify it a bit, then call it their own without any credit. I'm not too bothered. Flattered actually that people want to claim my guns. Sometimes they just forget to credit people but either way it annoys me. http://www.youtube.com/watch?v=34yljlaUOXY This guy has been bugging me forever on youtube. I know it's a toy but really I'm tired of all the children who must make webcam videos like this. I was really wondering when he'd finally build something of mine. The funny part is he downgraded my oodassault pistol. OK so the safety isn't that big of a deal but what happened to the mag tilting? He has disgraced my Oodassault series >_>

Topic by TheDunkis   |  last reply


He who says there's no such thing as global warming.

A friend of mine today firmly told me that there's no global warming and we should all stop trying to struggle improve efficiency (and then as an afterthought added "especially with policies, and liberalness and the such). It was a dumb inconsiderate reply but non the less, I snapped at him. I told him that we should just let ourselves cut down all the trees and pollute our atmosphere so much that marathon running would become a dangerous sport. He looked at me sheepishly and said something to the effect of well you shoulden't worry so much and Al Gore is a nutcase. Typical conservative catholic response. The point of telling you this story was to encourage you to say what you think in the comments section, and to inspire you to create ways to make us (the race of polluters) better. So go on, debate it up!

Topic by DELETED_craz meanman   |  last reply


WOW its been a long time...

Alright, I know its been a long time and there are probably a lot of things posted on my ibles that i haven't answered. If thats the case then just ask anything you want on this forum and I'll get to answering it. Because it has been such a long time i was kind of expecting to see some great new stuff out there, but I have to say, I'm not very impressed. Sure there are some good guns that came out, a couple bolt actions and bullpups that were impressive, but other than that, theres not much new. We aren't ging to get anywhere unless we start coming up with new ideas and sharing those ideas so that others can make them better. That said, I'm glad to be back and look forward to building with you. -Kinetic 

Topic by Kinetic   |  last reply


Viper Knex Gun

This is my first ever knex gun. I have called it the viper. it doesnt shoot that far but is more of a short range handgun than a powerful big gun. The gun has an expansion port so you can add other things to it but cannot be used when the handle is folded in. The handle can be folded up to make it easier to store

Topic by davidturner666   |  last reply


Calling All Ball Machiners And Knex People! Challenge

I play ping pong ALOT, but since my brothers moved out to college I can't play anymore. I've looked all over the Internet but I can't find any knex ping pong ball thrower/shooter/whatever. So the challenge is (since I can't make one) to create an automated (gravity or motor powered) ping pong ball thrower preferably out of knex. It would be greatly appreciated. Here's some inspiration if you want itHomemade ping pong ball thrower

Topic by sc lightning   |  last reply


What is your favorite game ?

1. What is your favorite game ? (PC , Xbox , playstation , or etc) 2. How many hours you spend for play games ? 3. Is this proportional with you age ? (More info)

Topic by farzadbayan   |  last reply


KNEX Robotic Controller

Howdy, What do KNEX builders use to control robotic projects.I am asking about the physical controller...do most fans use one of the hobbyist controllers (BASIC STAMP, Cricket, Arduino, etc) or do fans hack the RCX/NXT? Does anyone use the old KNEX controller "Leornardo" ? Thanks, Richard

Topic by ftking_83702   |  last reply


How Did You Meet Your Special Someone?

Title is self explanitory And how did you know that they were the one??? Also what kind of relationship is it? (Long distance, inperson, Open, etc.)

Topic by ArcticChill   |  last reply


My web site

I have recently taken up the hobby of game making, one thing led to another and now i have a website with games on it and to be posted, please fill out the surveys and send emails with ideas it pythonproductions@hotmail.com The website is... http://pythonproductions.weebly.com/

Topic by knex gun builder freak   |  last reply


XBox live

I got xbox live. Pm me your gamertags and i'll add you. I'm not posting my own publicly because i don't want spam.

Topic by The Jamalam   |  last reply


Hey Ibles! Help me choose what to study!

There comes a time in every Keith's  life where he must stop being a Keith-Kid and become a Keith-Man. Yes, soon I shall end my highschool life and embark on the journey to adulthood. Problem is...I...kinda have no idea what to study. The only thing I can really say I enjoy doin is....well...i dunno. I'm kiiinda good with computers....and ...well I guess my talents fall into the Art category. I enjoy drawing, (even though I havent drawn in over a year...that might be an obstacle...) I could maybe envision myself being a graphic artist, I dont know I could picture myself animating a commercial or stuff...I don't really know how it all works... I have some experience in video and photo editing. No programing experience, aside from knowing the definition of HTML (no points for that? come on...) So...basically.... Can you guys suggest what I should study? Also, over here in my tiny little island, there isn't much for Graphic Design....Theres ONE school, but i dunno all I see there are emo peoples and...i dunno...I cant say I like it very much.. SO YEA! Suggestions! Help a Keith out will ya? T_T

Topic by Keith-Kid   |  last reply


How to make Noobcakes

Hey guys, i just wanted to share this quick recipe with you knexers, since your all so close to me, this is a family secret, so it does not leave this forum category, thankyou. Here we go. Ingredients: 1/2 ts salt 1/2 cup sugar 1 Shadowman39 1oz butter 3 ts chocolate powder 2 eggs So, get those ingredients, and now lets get cooking! First, crack 2 eggs into a bowl, and whisk until smooth. Next add in 1/2 ts of salt and mix with the eggs. Now take 1 Shadowman39 and slowly peel the skin and wash thoroughly. Add the Shadowman39 into the bowl with the eggs and salt, then mix a little more, carry on mixing until it has a smooth texture. After that, get you 3ts of chocolate power and add them one by one, while also adding small amount of the butter. Now all of your ingredients have been put together, mix them all up for around 2-3 minutes until thick and creamy. Next, get some cake cases and lay them evenly apart on a baking tray. Now spoon the cake mixture out of the bowl and into each cake case. Pop them in the oven at 270 degrees and bake for 20-30 minutes. When you think then are about done, take one cake and carefully poke a knife into the top, just to check if they are firm. Congrats, you have just made your own noobcakes!!! These noobcakes are great to share with your family and friends, as they are delicious. The butter combined with the eggs gives for the nice smooth texture, as the Shadowman39 gives it that wonderfully pleasant aftertaste. Thanks for taking your time to read my personal family recipe, leave your feedback below, and i wish you years of happy noobcake making. Thankyou.  

Topic by Hiyadudez   |  last reply


Up and Coming

Contrary to popular belief, I havent left instructables, and I havent died. I have however been working on bunches of projects (some of which you may remember from my "Things I'm Going to Post Soon" slideshow). Unfortunately, most projects, such as a crossbow, slide-action pistol, semi-auto sniper, etc., have miserably failed. And even worse, several projects (FAMAS, M6G, and the D.R.A.G.O.N) have been demolished for lack of pieces, and will need to be rebuilt. The first project to be posted will be my M6G Magnum (halo 1 pistol), which should be up by the end of the week, followed by my completely new Sniper, the KSR (at least until I find a better name), which I have made since, according to previous feedback, my R700 simply wasnt cutting the jib. It features an extremely comfortable handle, an upgraded trigger system, and better overall statistics (range and accuracy). After that is posted, I might be able to rebuild the FAMAS, or the DRAGON, but dont get your hopes up, they are hard to remake, so I'll probably just make a new gun, such as the Shipka SMG. Stats: M6G Magnum •Range: ~ 20-30 ft. •Accuracy: Consistent •Mag: Loads 9 pcs. KSR •Range: ~65-70 ft. (depending on bands) •Accuracy: Very Consistent •Mag: Single shot / rail system FAMAS •Range: ~30-40 ft. •Accuracy: Good consistency •Mag: Loads 12 pcs. D.R.A.G.O.N •Range: ~50-80 ft. (depending on ammo type) •Accuracy: Medium consistency •Mag: Single shot / dual rail system PS - Constructive critisism is welcome, but dont just say: "wow _____ gun sucks" The pictures are as follows: 1. M6G Magnum (w/ comparison) 2. KSR 3. FAMAS (w/ comparison) 4. D.R.A.G.O.N

Topic by Big Z   |  last reply


Can a solid state amplifier be reconstructed/reconfigured as a tube amp?

All guitarists seem to prefer the sound of a tube amp over solid state. Amp manufacturers, after committing to the solid state format, hook, line, and heat sinker, must have been appalled when guitarists began to demand availability of the old school tube amps, and scrambled to replicate the distinctive tube sound by means of additional effects and eventually modelling features. But, the big boys doggedly refused to admit the error of their ways, which, as it turns out, was a good thing as new amp manufacturers began to spring up to fill the void. Finally after sitting around their boardrooms, no doubt sipping their Coke new recipes while watching their market shares dwindle, they decided to reissue some of their most popular tube amps...at six times the initial price of course. I can't afford a new tube amp. I can't afford a used tube amp. Ebay and craigslist are rife with inexpensive, (relatively), solid state amps. My question then is, could a solid state amp be retrofitted with a tube chassis and perhaps still utilize some of the solid state attributes and parts? My instinct tells me yes. However, my knowledge of electronics and theory being nil, I really haven't the foggiest idea of what might be involved with such an undertaking. To say that a schematic is Greek to me is a gross understatement. Therefore, I appeal to the genius of the Instructable contributers to comment, or even better, start a project build. (C'mon gmoon, you know you want to!) Thanks Sycan

Topic by Sycan   |  last reply


Pets

Any ideas for homemade pet toys or treats that cost under $10.00 are welcome Here are a few examples: Hamster hammock,dog bed,cat castle,dog treats,cat teaser. Or anything else you can think of !!!

Topic by shooter129   |  last reply


Need Crossbow Trigger Help

I need some help with this heavily modded Reaper, I need a sturdy trigger to fire the crossbow, but that has been proven too difficult for me as I don't have much trigger mech experience. At one point I had it fully working when not loaded, untill it snapped the trigger when I tried to fire an arrow. :P

Topic by Wicky   |  last reply


Long Time Gone

So im guessing that most of you wont really remember me, i have not made a full come back to knex but i am mainly just trying to see if i still have the main skills but im going to give it a shot but at christmas i will be stopping as i am going to try and sell my knex again but at the moment i am working on a project which i dont think many people have suceeded in doing but i have nearly finished my !! spas 12 !! so yeah i will be posting pictures but i dought i will be posting as ive used many broken peices to get it to work the way i want but the main concept is very simple i may attach a picture once its done to this post

Topic by knex mad   |  last reply